Basic Operation

Bidirectional motors - those that can rotate in either direction – are of two classes: 1. Reversing motors , which can change from full speed in one direction to full speed in the opposite direction. 2. Reversible motors , which can be reversed only when the motor is not running, or is running below cut out speed. Some motor manufacturers distinguish between quick reversing and instant reversing. A quick reversing motor requires a time delay of approximately 1/25th of a second or more for the switching circuitry to react. An instant reversing motor requires absolutely no time delay. The standard SINPAC Switch can be used on reversible and reversing motors. The SINPAC IR Series Switch provides the function of a direction sensing centrifugal switch and makes a reversible capacitor start motor into an instant reversing motor.

In order to reverse a single-phase motor, it is necessary to reverse the polarity of either the start or main winding, but not both at the same time. The reversal of the winding is accomplished with an external reversing switch or contactor that is not part of the SINPAC Switch. SINPAC Instant Reverse Switch is not dependent upon how quickly the user operates the reversing switch, but only that the reversing switch did change states, i.e., forward to reverse, or vice versa. The SINPAC Switch detects the change in the phase shift between the main and start windings, and the logic circuit instantly actuates the starting switch, causing the start circuit to be reconnected to line voltage. This connection causes the motor to decelerate and then reaccelerate in the opposite direction. The SINPAC IR Series Switch interrupts the start circuit current after the motor has accelerated to the cut out speed, and reconnects the start circuit whenever the circuit senses the motor speed has fallen to cut in speed (usually about 50% of synchronous motor speed).
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Typical Maximum Motor HP

Typical Full Load Motor Nameplate Current rating @ 115V

Typical Full Load Motor Nameplate Current rating @ 230V

Switch Rating and Permissible Maximum Start Winding Current

Start Winding Voltage

Kit Part Number

Cut-out Voltage

Cut-in Voltage

Package Style

List Price

Sort by
N/A 0.5 N/A 12 A N/A 6 A N/A 25 A N/A 115 V N/A 4-7-51025-15-UA1 N/A 130 V N/A 30 V N/A 15 $0.00
N/A 0.5 N/A 12 A N/A 6 A N/A 25 A N/A 115 V N/A 4-7-51025-15-U01 N/A 165 V N/A 37 V N/A 15 $0.00
N/A 2 N/A 20 A N/A 10 A N/A 40 A N/A 115 V N/A 4-7-51040-15-UA1 N/A 130 V N/A 30 V N/A 15 $166.62
N/A 2 N/A 20 A N/A 10 A N/A 40 A N/A 115 V N/A 4-7-51040-15-UO1 N/A 165 V N/A 37 V N/A 15 $173.86
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1